News

Placing a hot pot directly into a composite kitchen sink may cause uneven heating of the sink surface, resulting in heat damage. In particular, the resin part contained in the composite kitchen sink has relatively poor heat resistance and is easily affected by high temperatures.

Rectangular kitchen sink is one of the most common sink shapes on the market. Rectangular kitchen sinks can be found in almost all kitchens. Its shape is simple and generous, suitable for various kitchen styles, especially modern and minimalist kitchens.

In the one-line kitchen layout, all work areas and equipment are arranged on one side of the wall. The stainless steel kitchen sink should be at least 6 inches (about 15 cm) away from the wall for easy cleaning, operation and daily maintenance.

Although the two materials are different, they have certain compatibility. The edge of the sink of top mount double sink is usually made of stainless steel, ceramic, composite materials, etc., which will not cause obvious discomfort when matched with quartz countertop.

A flushmount sink is installed by embedding the sink into the kitchen countertop. The upper edge of this sink is flush or slightly lower than the countertop surface. A top-mounted kitchen sink places the edge of the sink above the countertop, and the upper edge of the sink is usually higher than the countertop, forming a clear boundary with the countertop.

As a high-humidity, high-water flow environment, the area around the quartz kitchen sink is easily splashed by water. If the gap between the sink and the countertop is not properly filled, water and liquid may penetrate into the gap, affecting the material of the countertop.

A 27-inch stainless steel kitchen sink is usually suitable for medium-sized kitchens. For most families, this size of sink does not take up too much countertop space, but can effectively provide enough cleaning area.

The stainless steel kitchen sink is an important drainage channel for the family kitchen. Oil, food residues and other debris can easily enter the drainage pipe with the water flow. If it is not cleaned in time or there are structural problems, bacteria may breed and form odors.

The installation methods of undermount sinks and flushmount sinks are quite different. The installation requirements of undermount sinks are higher, because the sink needs to be embedded under the countertop, the countertop needs to be professionally cut, and special attention needs to be paid to the support and sealing of the sink during installation.

Pros of topmount kitchen sink: Easy installation and short construction period Good waterproof performance Easier maintenance Unique visual effect Easy to clean Cons of topmount kitchen sink: May cause countertop pollution Countertop is easily damaged The outer edge is more abrupt, affecting the appearance The problem of matching the size of the sink with the countertop The edge of the sink is sharp, posing a safety hazard