News

To ensure a smooth installation of a double-bowl sink, the countertop width must be wide enough to accommodate the sink. When installing a double-bowl sink, the countertop width should be at least 10 cm wider than the sink to ensure a secure placement while leaving ample space for operation.

Common sizes include the following: 1. 600mm (24-inch) double bowl sink 2. 750mm (30-inch) double bowl sink 3. 800mm (32-inch) double bowl sink 4. 900mm (36-inch) double bowl sink 5. 1000mm (40-inch) double bowl sink

A double bowl kitchen sink consists of two sinks of the same or different sizes, which are usually placed side by side on a sink countertop. This design is sometimes also called a "separated sink". Compared with a single-bowl sink, its advantage is that it can perform different types of operations without interfering with each other.

Advantages of double bowl sink in the kitchen: 1. Improve kitchen work efficiency 2. Increase the flexibility of kitchen cleaning 3. Adapt to more kitchen needs 4. Provide more design options 5. Easy to maintain and clean Disadvantages of double bowl sinks in the kitchen: 1. Takes up more kitchen space 2. High installation and cost 3. More prone to water accumulation and bacteria 4. Requires more maintenance and attention 5. Improper slot spacing may affect use

The answer is: very much needed! Double bowl kitchen sinks have a series of advantages that single-bowl sinks cannot match. From providing more operating space to improving cleaning efficiency, double bowl kitchen sinks can greatly improve the kitchen experience.

For kitchens with smaller spaces, sharing a drain pipe may be a more ideal choice because it can save more space and avoid complex pipe layout. If the kitchen space is spacious, installing two independent drain pipes is more flexible and practical.

The purpose of the kitchen double bowl sink: 1. Separate food washing and tableware washing 2. Separate soaking and rinsing 3. Wash vegetables and wash pots separately 4. Convenient temporary storage function of the sink 5. Perform two cleaning tasks at the same time 6. Handle food waste and cleaning supplies

According to the pipeline installation specifications and architectural design standards, it is clearly stated that it is not appropriate to install two separate traps for the Kitchen double bowl sink. The main reasons are as follows: 1. Prevent airflow and water seal damage 2. Avoid blockage of drainage pipes 3. Improve the simplicity and drainage efficiency of the system