News

Compared to single-bowl sinks, double-bowl sinks require two drain outlets to converge on the same drainpipe. If the connection is poorly designed, such as a T-joint with an excessively small angle, it can easily cause water flow to clash and pressure imbalance, leading to poor drainage.

To ensure a smooth installation of a double-bowl sink, the countertop width must be wide enough to accommodate the sink. When installing a double-bowl sink, the countertop width should be at least 10 cm wider than the sink to ensure a secure placement while leaving ample space for operation.

Common sizes include the following: 1. 600mm (24-inch) double bowl sink 2. 750mm (30-inch) double bowl sink 3. 800mm (32-inch) double bowl sink 4. 900mm (36-inch) double bowl sink 5. 1000mm (40-inch) double bowl sink

A double bowl kitchen sink consists of two sinks of the same or different sizes, which are usually placed side by side on a sink countertop. This design is sometimes also called a "separated sink". Compared with a single-bowl sink, its advantage is that it can perform different types of operations without interfering with each other.

The answer is: very much needed! Double bowl kitchen sinks have a series of advantages that single-bowl sinks cannot match. From providing more operating space to improving cleaning efficiency, double bowl kitchen sinks can greatly improve the kitchen experience.