News

Double-bowl inox sinks are the most popular type of sink in recent years, especially for families with large home cooking needs. Its size is usually between 80-100 cm, and the depth is generally 20-25 cm. The biggest advantage of a double-bowl inox sink is that different washing tasks can be performed at the same time, improving work efficiency.

The standard faucet installation hole is usually a hole with a diameter of 35 mm, which is widely used in most kitchen stainless steel sinks. However, not all stainless steel sinks have this size of hole diameter. Some stainless steel sinks may use a larger or smaller hole design, especially in some specially designed stainless steel sinks.

In modern kitchen design, the kitchen inox sink is not just a facility for drainage, it often works together with other kitchen equipment to form an efficient cleaning system. To meet this demand, some additional holes are reserved on the kitchen inox sink for installing various kitchen accessories.

Water quality is an important factor that causes stainless steel sinks to turn yellow. If the water used in the kitchen sink is hard and contains high minerals or organic matter, when the water flows through the surface of the sink, the minerals are deposited on the surface of the sink, which is easy to form scale.

The service life of a composite sink is usually 10 to 20 years. Under the premise of high-quality materials, advanced manufacturing processes, and reasonable use and maintenance, it can even reach more than 30 years.

The space in the kitchen is limited, especially in some smaller apartment kitchens, it is particularly important to reasonably allocate every inch of space. If the sink is placed in the center of the countertop, the kitchen space may be occupied unnecessarily.

Single-bowl sinks are usually the most commonly used sink type in home kitchens, suitable for small kitchens or families that require simpler cleaning operations. Common sizes of single-bowl sinks are 50cm x 40cm, 60cm x 45cm, 70cm x 50cm, etc.

The sink drain is the first place where water flows into the pipe and is also the area most prone to blockage. Because the sink drain is connected to the bottom of the sink, a large amount of food residue, grease, foam and other dirt often accumulates in this position.

The pipe between the drain in the sink and the sewer needs to maintain a certain air pressure balance. If the drainage pipe is completely sealed and there is no vent, the water will flow through the pipe, which will cause negative pressure inside the pipe, which will affect the drainage speed and may even cause the water in the sink to be unable to be discharged smoothly.

The space under the sink usually hides facilities such as water pipes, drainage pipes, and garbage disposals. These devices may cause moisture accumulation and lead to a series of problems. Installing vents can help keep the area dry and reduce moisture accumulation.