News

The installation methods of undermount sinks and flushmount sinks are quite different. The installation requirements of undermount sinks are higher, because the sink needs to be embedded under the countertop, the countertop needs to be professionally cut, and special attention needs to be paid to the support and sealing of the sink during installation.

Generally, the thicker the sink, the stronger its load-bearing capacity. For example, the thickness of stainless steel sinks is usually 0.6 mm to 1.2 mm. Thicker stainless steel sinks can withstand greater weight, especially stainless steel sinks with a thickness of more than 1 mm, which can withstand strong pressure.

Single-bowl undermount sinks are one of the most common types in the kitchen. They usually have a wide, moderately deep trough body suitable for daily washing and cleaning work. The size of a single-bowl sink is usually between 15 inches and 30 inches (about 38-76 cm).

Topmount kitchen sink is a very popular type of sink on the market. The main feature of topmount kitchen sink is that the edge of the sink is exposed, the upper edge of the sink is directly flush with the countertop, and the junction between the sink and the countertop is fixed by fasteners such as screws.

Compared with undermount sinks, flushmount sinks are much simpler to install. The sink only needs to be placed on the countertop and fixed with the edge. This makes flushmount sinks more suitable for those who do their own renovations or have no experience.

4mm setback is one of the most common standards at present and is widely used in most home and commercial kitchens. This size of setback can ensure that the gap between the undermount sink and the countertop is moderate, while also avoiding the situation where the edge of the sink is too protruding.

The drain opening size of undermount kitchen sinks is not set in stone, and different types of sinks may have different drain opening specifications. When choosing a sink, consumers must understand these differences to ensure compatibility of drain accessories.

Protrusion distance of 2-5 mm This is a more conservative design, suitable for kitchens that pursue a minimalist design style. The characteristic of this design is that the countertop is almost flush with the stainless steel kitchen sink, with only a slight protrusion.

If consumers want to replace an above-counter sink with an under-counter sink, they first need to consider the material and load-bearing capacity of the countertop. Under-counter sinks are usually suitable for thicker stone countertops or artificial stone countertops, while thin countertop materials (such as wood or thin stainless steel countertops) may not be suitable for installing under-counter sinks.

The materials of kitchen sinks suitable for quartz countertops are: 1. Stainless steel sink 2. Quartz composite sink 3. Ceramic sink 4. Stainless steel quartz composite sink