News

Common sizes include the following: 1. 600mm (24-inch) double bowl sink 2. 750mm (30-inch) double bowl sink 3. 800mm (32-inch) double bowl sink 4. 900mm (36-inch) double bowl sink 5. 1000mm (40-inch) double bowl sink

304 stainless steel (18% chromium and 8% nickel) is a common, high-quality stainless steel material on the market, offering strong corrosion resistance and relatively good scratch resistance. However, some lower-quality stainless steel sinks may use 201 stainless steel or other lower-grade materials, which have lower hardness and scratch resistance and are therefore susceptible to scratches from hard objects.

A stainless steel farmhouse kitchen sink is a stainless steel sink, often a core element of a farmhouse-style kitchen. The farmhouse style, inspired by traditional rural kitchen design, emphasizes functionality and a natural, rustic aesthetic, striving to create a warm, peaceful, and homely atmosphere.

Stainless steel sinks are highly resistant to stains. Because their smooth surface is less susceptible to the accumulation of bacteria, grease, and dirt, stainless steel sinks effectively reduce the adhesion of stains. This makes daily cleaning easier; simply wiping away oil and dirt removes surface stains.

Use a tape measure to measure the length and width of the countertop opening. Be sure to align the measuring lines with the ends of the opening to avoid measurement deviations. If the original undermount sink opening is not a perfect rectangle or square but has some curves or other shapes, measure the length and width of each side separately.

One of the most prominent features of undercounter kitchen sinks is their seamless integration with the countertop. Undermount sinks are installed flush with the countertop, eliminating the exposed lip of traditional sinks. This creates a seamless connection between the countertop and sink, enhancing the overall aesthetic.

Surface treatments for stainless steel sinks include: 1. Brushed Finish 2. Mirror Finish 3. Sandblasted Finish 4. Anodized Finish Brushed finish is one of the most common stainless steel surface treatments, particularly used on kitchen sinks.

Advantages of Undermount Kitchen Sinks: 1. Beautiful and Clean 2. Easy to Clean 3. Better Space Utilization 4. Increased Countertop Space 5. Higher Durability Disadvantages of Undermount Kitchen Sinks: 1. Installation difficulty 2. High maintenance costs 3. Not suitable for all countertop materials 4. High requirements for sink material quality 5. Countertop load-bearing issues

Leaking kitchen sink faucets are not uncommon; nearly every household has a faucet that leaks. Causes of kitchen faucet leaks include: 1. Improper installation 2. Aging or damaged pipes 3. Deteriorated faucet seals 4. Faucet valve cartridge problems 5. Excessive water pressure 6. Water quality issues

The purpose of a stainless steel kitchen sink rack: 1. Prevents scratches and wear on the sink bottom 2. Facilitates drainage and ventilation 3. Increases sink storage space 4. Prevents stains from accumulating 5. Reduces noise levels 6. Enhances aesthetics and overall design