News

Causes of undermount kitchen sinks falling include: 1. Improper installation 2. Problems with the countertop material 3. Problems with the quality of the adhesive or fixings 4. Poor contact between the sink and the countertop 5. Uneven weight distribution of the sink 6. Wear and tear from long-term use

For homes with specific installation requirements or those seeking a higher standard, an undermount kitchen sink is an ideal choice. However, if your kitchen requires more flexible and convenient installation, a topmount sink would be a better option.

An undermount kitchen sink typically has a lifespan of ten to twenty years. The specific lifespan depends on many factors, including the sink's material, installation quality, daily usage, and maintenance.

Use a tape measure to measure the length and width of the countertop opening. Be sure to align the measuring lines with the ends of the opening to avoid measurement deviations. If the original undermount sink opening is not a perfect rectangle or square but has some curves or other shapes, measure the length and width of each side separately.

Advantages of Undermount Kitchen Sinks: 1. Beautiful and Clean 2. Easy to Clean 3. Better Space Utilization 4. Increased Countertop Space 5. Higher Durability Disadvantages of Undermount Kitchen Sinks: 1. Installation difficulty 2. High maintenance costs 3. Not suitable for all countertop materials 4. High requirements for sink material quality 5. Countertop load-bearing issues

Won't! One of the biggest advantages of an undermount kitchen sink is its rim design. Because the rim is located below the countertop, there is no rim or seam like in traditional top-mounted sinks. This design allows water to flow directly from the countertop into the sink, eliminating the accumulation of stains between the sink and the countertop.

Standard single-bowl sinks are usually 30 cm to 50 cm wide, 60 cm to 80 cm long, and 20 cm to 25 cm deep; double-bowl sinks are 20 cm to 30 cm wide per bowl, usually 80 cm to 100 cm long, and 20 cm to 25 cm deep.

In most cases, undermount kitchen sinks do not come with a faucet hole. This is because the sink itself is generally not designed with the need for a faucet hole in mind. The installation location of the faucet is usually determined based on the design of the kitchen countertop and the needs of the user.

In order to prevent the sink from mold, keeping the sink clean is a vital step. After using the sink every day, you should wipe off the water stains on the sink and countertop in time.

Generally, the thicker the sink, the stronger its load-bearing capacity. For example, the thickness of stainless steel sinks is usually 0.6 mm to 1.2 mm. Thicker stainless steel sinks can withstand greater weight, especially stainless steel sinks with a thickness of more than 1 mm, which can withstand strong pressure.