Industry News

Compared to single-bowl sinks, double-bowl sinks require two drain outlets to converge on the same drainpipe. If the connection is poorly designed, such as a T-joint with an excessively small angle, it can easily cause water flow to clash and pressure imbalance, leading to poor drainage.

Many people, upon hearing "316 is better than 304," mistakenly believe that a higher-grade material must be more suitable for the kitchen. This is a common misconception. 304 can easily resist common kitchen irritants such as water, salt, alkali, and grease. The "extra corrosion resistance" of 316 is almost meaningless in a typical home environment.

Stamped sinks are formed from a single sheet of stainless steel using a large stamping machine, with the body and corners naturally shaped without welding. The manufacturing process for handmade sinks is completely different. Therefore, welds are an inevitable part of the structure of handmade stainless steel kitchen sinks.

Baking soda is a common and safe alkaline cleaner that has a neutralizing effect on rust. Instructions: • Mix baking soda with a small amount of water to form a paste. • Apply evenly to the rusted areas of the stainless steel kitchen sink. • Let it sit for 10-15 minutes, then gently wipe with a soft sponge. • Rinse thoroughly and dry.

For most medium-sized family kitchens, a standard-sized double-bowl corner sink is recommended, as it is both practical and space-efficient. Recommended Countertop Space: • Countertop width on both sides ≥ 600mm; • Effective diagonal distance approximately 850–900mm.

Sure! The high-hardness coating of black kitchen faucets perfectly matches the wear resistance of stainless steel sinks, preventing significant wear and tear from daily use. Furthermore, both materials are corrosion-resistant and exhibit no noticeable aging or discoloration even with prolonged exposure to water and detergents.

The biggest advantage of tall faucets is that they provide a more spacious washing area. Whether washing pots and pans, rinsing fruits and vegetables, or filling large kettles, a high enough kitchen sink faucet avoids the problems of bending over, bumping into things, or splashing water.

While both methods are feasible, undermount installation is more common in high-end kitchen designs. The main reasons are as follows: • Higher compatibility with craftsmanship • More sophisticated visual effect • Alignment with modern cabinet design trends

A brushed stainless steel sink refers to a kitchen sink made of stainless steel that has undergone a brushing process. Stainless steel is a material made by alloying iron with elements such as chromium and nickel, possessing excellent corrosion resistance and mechanical strength.

To keep your black quartz sink black, consumers must: • Scientific cleaning: Daily cleaning and regular deep cleaning; • Careful maintenance: Use protective agents to avoid extreme damage; • Good habits: Always dry your sink after use to reduce the accumulation of water stains and grease.