News

If you pour vinegar directly into a stainless steel kitchen sink and don't rinse it for a long time, it may cause dark spots, dullness, or even micro-pitting corrosion on the surface.

Loose Drain Fitting This is the most common cause of leaks under stainless steel kitchen sinks. The sliding fitting (also known as a union) connects the sink outlet to the drain pipe. When the threads are not tightened or the rubber ring is misaligned, leaks will occur during drainage.

Common fixing methods for undermount sinks: ✔ Metal clips ✔ Support frame/wooden board ✔ Structural adhesive/silicone Therefore, when replacing an undermount sink, all operations are: Climb into the cabinet and move the sink from below, without touching the countertop.

Strong Adhesives are a Core Securement Method A key to securing an undermount sink is using professionally applied stone adhesive, structural adhesive, or epoxy adhesive. High-quality structural adhesives can withstand long-term tensile, sagging, and impact forces, ensuring the undermount sink's stability.

High-curve kitchen sink faucets have a higher spout position, typically rising 25-45 cm from the countertop. Low-curve kitchen sink faucets have a lower spout position, typically 15-25 cm high. They have a more compact and simpler appearance and are often used in small kitchens or areas with low wall cabinets.

When choosing an undermount sink, the sink material must be able to withstand the weight, tension, and long-term stress brought about by the suspended installation method. Stainless steel has a natural advantage in this regard, making stainless steel undermount sinks exceptionally stable during installation.

Countertop sinks, due to their raised edges, easily accumulate limescale, grease, and food residue. Undermount kitchen sinks, with their recessed design, allow dirt from the countertop to be directly swept into the sink with a cloth or scraper.

304 stainless steel sinks, under normal kitchen conditions, can withstand long-term contact with water, salt, and the acidic and alkaline substances in everyday food without easily rusting. Their smooth surface is easy to clean, making them suitable for most family kitchens and a basic guarantee of a healthy kitchen sink.

PVD sinks are not a new sink material; they are essentially still stainless steel sinks. PVD refers to a surface coating process, short for Physical Vapor Deposition. This process deposits a layer of metal ion plating on the surface of the stainless steel sink to improve surface color, wear resistance, and corrosion resistance.

Daily Cleaning: • Rinse with water • Wipe with a soft sponge and neutral detergent • Rinse thoroughly with hot water • Dry with a microfiber cloth Deep Cleaning: • Sprinkle with baking soda • Spray with white vinegar • Let it sit and scrub • Rinse thoroughly • Dry • Lightly wipe the sink surface with a small amount of stainless steel polish