News

The purpose of a stainless steel kitchen sink rack: 1. Prevents scratches and wear on the sink bottom 2. Facilitates drainage and ventilation 3. Increases sink storage space 4. Prevents stains from accumulating 5. Reduces noise levels 6. Enhances aesthetics and overall design

Won't! One of the biggest advantages of an undermount kitchen sink is its rim design. Because the rim is located below the countertop, there is no rim or seam like in traditional top-mounted sinks. This design allows water to flow directly from the countertop into the sink, eliminating the accumulation of stains between the sink and the countertop.

Theoretically, it's not possible. Based on the design features and installation methods of undermount and recessed sinks, we can conclude that it's unlikely that a sink can combine the characteristics of both undermount and built-in. The main reasons are as follows: · Different design requirements · Different installation methods

A recessed kitchen sink, also known as an above-mount sink, is a sink that is recessed into the kitchen countertop. Unlike traditional sink installations, the rim of a recessed kitchen sink is flush with or slightly raised from the countertop, so it is not hidden beneath the countertop like an undermount sink.

Pour the cleaner on the surface of the stainless steel kitchen sink and gently wipe the sink with a soft cloth or sponge. Pay special attention to cleaning all corners of the sink, including the bottom and edge of the sink. For stubborn stains, you can spray the cleaner on the stains and let it sit for a few minutes before wiping, which will help soften and remove the stains.

A double bowl kitchen sink consists of two sinks of the same or different sizes, which are usually placed side by side on a sink countertop. This design is sometimes also called a "separated sink". Compared with a single-bowl sink, its advantage is that it can perform different types of operations without interfering with each other.

The grade of stainless steel usually refers to the classification standards of its chemical composition and physical properties. Common classification methods include ASTM standards in the United States, European standards, and Japanese standards. In the field of kitchen sinks, the most widely used is austenitic stainless steel, mainly including grades 304 and 316.

Generally speaking, the distance between the stainless steel kitchen sink and the backsplash is recommended to be kept at about 3 cm to 5 cm. This range is set based on the following considerations: · Waterproof function · Operation space · Aesthetics

Standard single-bowl sinks are usually 30 cm to 50 cm wide, 60 cm to 80 cm long, and 20 cm to 25 cm deep; double-bowl sinks are 20 cm to 30 cm wide per bowl, usually 80 cm to 100 cm long, and 20 cm to 25 cm deep.

The hole position of the sink is an important factor affecting the feasibility of faucet replacement. If your sink originally has only one hole for installing a single-hole faucet, then when replacing it with a two-hole faucet, first check whether the sink has the conditions for installing two holes.