News

Yes, the standard procedure requires the undermount sink to be installed before the countertop. The undermount sink needs to be secured under the countertop first, and then the countertop is placed and installed.

If you pour vinegar directly into a stainless steel kitchen sink and don't rinse it for a long time, it may cause dark spots, dullness, or even micro-pitting corrosion on the surface.

Loose Drain Fitting This is the most common cause of leaks under stainless steel kitchen sinks. The sliding fitting (also known as a union) connects the sink outlet to the drain pipe. When the threads are not tightened or the rubber ring is misaligned, leaks will occur during drainage.

Common fixing methods for undermount sinks: ✔ Metal clips ✔ Support frame/wooden board ✔ Structural adhesive/silicone Therefore, when replacing an undermount sink, all operations are: Climb into the cabinet and move the sink from below, without touching the countertop.

Strong Adhesives are a Core Securement Method A key to securing an undermount sink is using professionally applied stone adhesive, structural adhesive, or epoxy adhesive. High-quality structural adhesives can withstand long-term tensile, sagging, and impact forces, ensuring the undermount sink's stability.

High-curve kitchen sink faucets have a higher spout position, typically rising 25-45 cm from the countertop. Low-curve kitchen sink faucets have a lower spout position, typically 15-25 cm high. They have a more compact and simpler appearance and are often used in small kitchens or areas with low wall cabinets.

Countertop sinks, due to their raised edges, easily accumulate limescale, grease, and food residue. Undermount kitchen sinks, with their recessed design, allow dirt from the countertop to be directly swept into the sink with a cloth or scraper.

Daily Cleaning: • Rinse with water • Wipe with a soft sponge and neutral detergent • Rinse thoroughly with hot water • Dry with a microfiber cloth Deep Cleaning: • Sprinkle with baking soda • Spray with white vinegar • Let it sit and scrub • Rinse thoroughly • Dry • Lightly wipe the sink surface with a small amount of stainless steel polish

It evaporates a metal target into ions, which are then deposited onto the surface of a 304 stainless steel sink, forming a dense, strong, and corrosion-resistant metal film. This film is very thin, yet possesses extremely high strength and adhesion, significantly enhancing the appearance and performance of the 304 stainless steel sink.

To prevent water stains from accumulating on the surface of stainless steel kitchen faucets, wipe the faucet surface dry immediately with a clean, soft cloth after each use, especially areas prone to water residue such as the faucet bends, base, and spout.