News

Compared to low-nickel steels like 201 or 430, 304 stainless steel offers superior rust resistance. Under normal use, 304 stainless steel sinks can remain rust-free and colorfast for years, a key reason for their widespread use in both home and commercial kitchens.

Under standard conditions, undermount kitchen sinks require 24–72 hours to fully cure and reach a safe usable state. In most cases, professional installers will recommend: • Wait at least 24 hours before touching the sink. • It is best to wait at least 48 hours before starting a large-volume water test or using it with water.

The answer is: Yes, but the probability and extent depend on usage and cleaning habits. Bacteria thrive in humid environments, and kitchen sinks, despite their high-quality materials, provide essential conditions for growth due to frequent use and constant moisture.

Yes, the standard procedure requires the undermount sink to be installed before the countertop. The undermount sink needs to be secured under the countertop first, and then the countertop is placed and installed.

If you pour vinegar directly into a stainless steel kitchen sink and don't rinse it for a long time, it may cause dark spots, dullness, or even micro-pitting corrosion on the surface.

Loose Drain Fitting This is the most common cause of leaks under stainless steel kitchen sinks. The sliding fitting (also known as a union) connects the sink outlet to the drain pipe. When the threads are not tightened or the rubber ring is misaligned, leaks will occur during drainage.

Common fixing methods for undermount sinks: ✔ Metal clips ✔ Support frame/wooden board ✔ Structural adhesive/silicone Therefore, when replacing an undermount sink, all operations are: Climb into the cabinet and move the sink from below, without touching the countertop.

Strong Adhesives are a Core Securement Method A key to securing an undermount sink is using professionally applied stone adhesive, structural adhesive, or epoxy adhesive. High-quality structural adhesives can withstand long-term tensile, sagging, and impact forces, ensuring the undermount sink's stability.

High-curve kitchen sink faucets have a higher spout position, typically rising 25-45 cm from the countertop. Low-curve kitchen sink faucets have a lower spout position, typically 15-25 cm high. They have a more compact and simpler appearance and are often used in small kitchens or areas with low wall cabinets.

Countertop sinks, due to their raised edges, easily accumulate limescale, grease, and food residue. Undermount kitchen sinks, with their recessed design, allow dirt from the countertop to be directly swept into the sink with a cloth or scraper.