News

From the perspective of material and structure, stainless steel undermount sinks inherently have good waterproof performance. As long as the sink material is qualified and the sink body has no cracks, it will not leak due to the sink itself during daily use.

Yes, white quartz sinks do have a certain risk of yellowing over time. However, don't worry too much, as this change mainly stems from resin aging, pigment deposition, water quality issues, and improper cleaning methods, rather than a change in the quartz particles themselves.

If you care about maintaining a perfect surface appearance, composite sinks are more scratch-resistant; If you prioritize impact resistance and long-term stable use, stainless steel sinks are more durable.

Minor Scratches are Not Permanent Most of the fine scratches seen on stainless steel kitchen sinks are actually minor surface wear. These scratches are typically: • Very shallow • Irregularly distributed • More noticeable when the angle of light changes • Can be faded or even disappeared with appropriate methods

In actual design and installation, the standard depth of undermount kitchen sinks is typically between 18 cm and 25 cm (approximately 7 to 10 inches). However, this is only a general reference range. The specific choice should be made in conjunction with the kitchen countertop height and the user's height.

Moderately increasing the thickness can indeed enhance the stability and lifespan of the sink. However, beyond a certain range (such as exceeding 1.5mm), the benefits diminish significantly. For example: • Limited increase in strength from thicker sinks; • Significantly increased weight, making installation more difficult; • Increased cost, but little improvement in daily user experience.

If your white quartz sink is only slightly dull or yellowed, this can be improved with regular cleaning. 1. Wash with warm water and neutral detergent. 2. Clean with a baking soda paste. 3. Add white vinegar to remove limescale. 4. Finally, rinse thoroughly with clean water.

Many people worry: Will stainless steel kitchen sinks be unstable when installed under the countertop? In fact, stainless steel undermount sinks are very reliable in terms of load-bearing capacity and durability. Compared to ceramic or granite sinks, stainless steel is lighter, placing less strain on the countertop and making undermount installation safer.

Compared to single-bowl sinks, double-bowl sinks require two drain outlets to converge on the same drainpipe. If the connection is poorly designed, such as a T-joint with an excessively small angle, it can easily cause water flow to clash and pressure imbalance, leading to poor drainage.

Many people, upon hearing "316 is better than 304," mistakenly believe that a higher-grade material must be more suitable for the kitchen. This is a common misconception. 304 can easily resist common kitchen irritants such as water, salt, alkali, and grease. The "extra corrosion resistance" of 316 is almost meaningless in a typical home environment.