News

In actual design and installation, the standard depth of undermount kitchen sinks is typically between 18 cm and 25 cm (approximately 7 to 10 inches). However, this is only a general reference range. The specific choice should be made in conjunction with the kitchen countertop height and the user's height.

Moderately increasing the thickness can indeed enhance the stability and lifespan of the sink. However, beyond a certain range (such as exceeding 1.5mm), the benefits diminish significantly. For example: • Limited increase in strength from thicker sinks; • Significantly increased weight, making installation more difficult; • Increased cost, but little improvement in daily user experience.

If your white quartz sink is only slightly dull or yellowed, this can be improved with regular cleaning. 1. Wash with warm water and neutral detergent. 2. Clean with a baking soda paste. 3. Add white vinegar to remove limescale. 4. Finally, rinse thoroughly with clean water.

Many people worry: Will stainless steel kitchen sinks be unstable when installed under the countertop? In fact, stainless steel undermount sinks are very reliable in terms of load-bearing capacity and durability. Compared to ceramic or granite sinks, stainless steel is lighter, placing less strain on the countertop and making undermount installation safer.

Compared to single-bowl sinks, double-bowl sinks require two drain outlets to converge on the same drainpipe. If the connection is poorly designed, such as a T-joint with an excessively small angle, it can easily cause water flow to clash and pressure imbalance, leading to poor drainage.

Many people, upon hearing "316 is better than 304," mistakenly believe that a higher-grade material must be more suitable for the kitchen. This is a common misconception. 304 can easily resist common kitchen irritants such as water, salt, alkali, and grease. The "extra corrosion resistance" of 316 is almost meaningless in a typical home environment.

Stamped sinks are formed from a single sheet of stainless steel using a large stamping machine, with the body and corners naturally shaped without welding. The manufacturing process for handmade sinks is completely different. Therefore, welds are an inevitable part of the structure of handmade stainless steel kitchen sinks.

Baking soda is a common and safe alkaline cleaner that has a neutralizing effect on rust. Instructions: • Mix baking soda with a small amount of water to form a paste. • Apply evenly to the rusted areas of the stainless steel kitchen sink. • Let it sit for 10-15 minutes, then gently wipe with a soft sponge. • Rinse thoroughly and dry.

For most medium-sized family kitchens, a standard-sized double-bowl corner sink is recommended, as it is both practical and space-efficient. Recommended Countertop Space: • Countertop width on both sides ≥ 600mm; • Effective diagonal distance approximately 850–900mm.

Sure! The high-hardness coating of black kitchen faucets perfectly matches the wear resistance of stainless steel sinks, preventing significant wear and tear from daily use. Furthermore, both materials are corrosion-resistant and exhibit no noticeable aging or discoloration even with prolonged exposure to water and detergents.