News

Moderately increasing the thickness can indeed enhance the stability and lifespan of the sink. However, beyond a certain range (such as exceeding 1.5mm), the benefits diminish significantly. For example: • Limited increase in strength from thicker sinks; • Significantly increased weight, making installation more difficult; • Increased cost, but little improvement in daily user experience.

Many people worry: Will stainless steel kitchen sinks be unstable when installed under the countertop? In fact, stainless steel undermount sinks are very reliable in terms of load-bearing capacity and durability. Compared to ceramic or granite sinks, stainless steel is lighter, placing less strain on the countertop and making undermount installation safer.

Many people, upon hearing "316 is better than 304," mistakenly believe that a higher-grade material must be more suitable for the kitchen. This is a common misconception. 304 can easily resist common kitchen irritants such as water, salt, alkali, and grease. The "extra corrosion resistance" of 316 is almost meaningless in a typical home environment.

Stamped sinks are formed from a single sheet of stainless steel using a large stamping machine, with the body and corners naturally shaped without welding. The manufacturing process for handmade sinks is completely different. Therefore, welds are an inevitable part of the structure of handmade stainless steel kitchen sinks.

Baking soda is a common and safe alkaline cleaner that has a neutralizing effect on rust. Instructions: • Mix baking soda with a small amount of water to form a paste. • Apply evenly to the rusted areas of the stainless steel kitchen sink. • Let it sit for 10-15 minutes, then gently wipe with a soft sponge. • Rinse thoroughly and dry.

Sure! The high-hardness coating of black kitchen faucets perfectly matches the wear resistance of stainless steel sinks, preventing significant wear and tear from daily use. Furthermore, both materials are corrosion-resistant and exhibit no noticeable aging or discoloration even with prolonged exposure to water and detergents.

While both methods are feasible, undermount installation is more common in high-end kitchen designs. The main reasons are as follows: • Higher compatibility with craftsmanship • More sophisticated visual effect • Alignment with modern cabinet design trends

A brushed stainless steel sink refers to a kitchen sink made of stainless steel that has undergone a brushing process. Stainless steel is a material made by alloying iron with elements such as chromium and nickel, possessing excellent corrosion resistance and mechanical strength.

—The answer is not fixed; it depends on the usage environment, cleaning habits, and material. Generally speaking, a light polish every three to six months is suitable for most households. Frequent use or harsh environments may require a shorter period, while regular maintenance can extend the period.

Although stainless steel is heat-resistant, the black surface can still be damaged by extreme temperature fluctuations. It is recommended not to place hot pots and pans directly in a black stainless steel sink.